Apple AirTag MOLLE and Universal 25mm Webbing Mount

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~1 g

Print time

~0 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs! Furthermore I used the official apple design guidelines to get the curvature of the AirTag just right. This mount requires no tools to assemble. To disassemble this mount, the cap has a small notch to use a screwdriver. Find more projects like this on my blog :) https://blog.hirnschall.net/ What and how to print: Do not reorient the parts. They are designed to print without support and are oriented for maximum strength. If you reorient them such that the layer-lines are normal to the prongs that interface with the webbing they might break off. You need to print: 1x airtag-molle.stl1x cap.stlUse a UV-resistant filament. The tolerances do not work on my printer: If the AirTag does not fit easily inside the airtag-molle.stl, use a negative value for the "XY Size Compensation" setting in the slicer for this part (e.g. -0.1mm). Move on to print the cap. If the cap cannot be pressed into the airtag-molle.stl, use a negative "XY Size Compensation" value. If the cap is too loose inside the airtag-molle.stl use a positve "XY Size Compensation" value.