PHONE HOLDER FOR MOTORCYCLE - PRINT IN PLACE

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

Hello once more, I present to you a fully 3D Printable - Print in Place - Phone Holder for Motorcycles with 1 inch (25mm) thickness handlebar. This is a completely new model, designed from scratch. It was based on my previous model that needed additional screwes for assembly. This model does NOT need them or any kind of after-print processing. It is designed to PRINT IN PLACE and assemble on your Bike. NOTE1: For the best grip with a metal handle on your bike I suggest putting double-sided tape between the handlebar and holder. NOTE2: When screwing nuts add a few drops of SuperGlue to them to be safe. You won't be able to unscrew them after, so make sure the position is right. NOTE3: Use only quality double-sided tape to attach the phone holder plate to your phone. I spent a long time designing this model so I would very much appreciate it if you hit like, make comments and upload your makes. If there is something that I missed please do not hesitate to write me or make a comment. I will make sure to correct it. I hope you will all enjoy this model as much as I am. Happy Printing Version 1.1 is LIVE from the 11th of May 2023. Updates: Main Body Part - Endings of the pushdown leaver were flattened slightly for better printing Lower Connector Part - No changes were made to this part Top Insert Part - No changes were made to this part Screw Part - Orientation was changed and fattened side was eliminated for nicer esthetics and better print. Phone Holder Part - No changes were made to this part Kit Assembly - All parts were rearranged for a better print 3D PRINTING SETTINGS NOTE: All models are oriented as they should print. Please don't rotate them for the best results. Tested on Elegoo Neptune 3 Pro with PrusaSlicer. Filament: PET-G Layer height: 0.2mm Infill: 50% (Gyroid) Parameters: 3 Supports: Depending on the Printer they may be needed on Phone Holder Part overhangs Brim: NO The first layer in: ~25m Print time: ~ 8h30m Filament consumption: ~76g ~25m