Rolling Storage Box

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

Highly customizable rolling storage bin system. https://youtu.be/Cm5bByFYJKk https://youtu.be/ak8NoDQWSmo https://youtu.be/tUDJG0Tqd8U CustomizationPick a size (small, medium, or large) and 8 bins that match your storage needs (you must include a "start" and "end" bin).Add 6x3mm cylinder magnets to the start and end bins to keep the bin securely closed Print orientationPrint all bins, cores, and lid with the largest flat side down.Print the optional label piece on its sideDo not print the pin files unless they are placed within the bin hinge (print-in-place) AssemblyPrint bins individually and attach by inserting a short piece of raw filament in each hinge. While it's possible to use the included pin files to make a print-in-place hinge, printing the bins individually will allow you to switch out bins in the future. If the filament falls out of the hinge too easily, a small drop of hot glue in the hinge hole will seal it in. InfillInfill is only relevant for the start/end bins, the core, and the cap. The other parts are just thin walls and won't require infill as long as you print with 3 perimeters. Can I sell copies of this?Yes! This project was shared under the Creative Commons - Attribution license. This license allows selling copies, but you must provide proper attribution, as detailed in the license itself. Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses. Click here for attribution examples