(LEGACY) Lack Enclosure Drawers - Prusa Mini Edition

In stock · Made-to-order resin · Ships from Auckland · Free shipping over $75

Material

High-Detail Resin (8K)

Colour

Grey

Weight

~40 g

Print time

~4.5 h

Shipping

$10 std · $20 express

Lead time

1-3 d print + 1-4 d ship

PRUSA MINI EDITIONIs your print enclosure "lacking" storage? Well I have the solution for you! The Lack Enclosure Drawer unlocks the incredible enhancement of storage for your enclosure in a new and exciting way. *Also works great as an addition to any workbench Features: • Seamless alignment for that oh-so-clean look. • Lack Drawers also include optional slots for magnets (20x5x2mm) allowing drawers to snap into place with a nice "Click" Print instructionsINTRO These drawers can be configured in a number of ways. To simplify assembly the drawer cases are alphanumerically identifiable. • R1M and R2M cases are design only for drawers on the right side end. • In a stacked arrangement A1M and R1M are all considered top row while A2 and R2 are considered second row. HARDWARE • Screws: 3x12mm wood screw or #4 x 3/4 inch screws • M2x6 Screws and M2 nuts (Used for attaching rows of drawers together) • Drill bit that is smaller diameter than the wood screws • 20x5x2mm Magnets INSTRUCTIONS • Use printed templates to mark the hole locations on the surface you are mounting the drawer case to. • Drill out marked locations • Make sure optional magnets are installed into drawer case • Screw drawer case in place using 3x12mm or #4 x¾ inch wood screw. • Insert magnets into drawer and slide in place. (If the magnets are opposing rather than attracting you need to reinstall them facing the opposite direction.) • If installing second row of drawers you will need to insert the M2 nuts into the hex slots on the A1M or R1M case. (Using a long M2 screw threaded into the hex to pull it in place is an easy way to do this.) • Attach A2M or R2M cases to the above hex nuts using M2x6 screws NOTE: all drawer cases will work fine if a single row of drawers is desired. Filament: PLA (PETG or ABS for heavier duty storage) Nozzle Size: 0.4mm Print Height: 0.2-0.35mm Infill: 10-20% Looking for the Original Lack Enclosure Drawers? Original Lack Enclosure Drawers (For MK3)