Anker PowerCore Speed 20000 PD Tripod Leg Clamp - for Manfrotto 055 Tripod
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~71 g
- Print time
- ~3.9 h
- Express shipping
- $20
More information
Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg.
It should also fit any other tripod with a leg diameter of 30 mm.
This might also fit other Anker PowerCore products with similar measurements. For reference, mine is 62.2 mm wide and 22.4 mm thick.
This is a two-part design. The lower clamp has a solid base to hold the power bank's base; the upper clamp holds it on top.
I highly recommend printing in PETG. I highly recommend printing in PETG. The tolerances are pretty tight for the clamp to hold the power bank. It's a really solid snap getting the clamp on and off the tripod leg so that the stiffer PLA might shatter. Also, for outside applications, PETG makes sense for its higher heat resistance.
Video: https://www.reddit.com/r/functionalprint/comments/kgzpuw/battery\_holder\_for\_timelapse\_photography\_with/
Print Settings
Printer Brand:
Prusa
Printer: I3 MK3S
Rafts:
No
Supports: No
Resolution:
0.2
Infill: 25%
Filament:
Prusament PETG Jet Black
Notes
I highly recommend printing in PETG. The tolerances are pretty tight for the clamp to hold the power bank. It's a really solid snap getting the clamp on and off the tripod leg so that the stiffer PLA might shatter. Also, for outside applications, PETG makes sense for its higher heat resistance.
I've printed with 3 vertical perimeters and gyroid infill.
Category: Gadgets
Design and description by Metalbird , licensed CC-BY.
Frequently asked
How long does shipping take?
Anker PowerCore Speed 20000 PD Tripod Leg Clamp - for Manfrotto 055 Tripod is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
