Einstar Handle MK1
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~77 g
- Print time
- ~4.2 h
- Express shipping
- $20
More information
This grip works great, but if you are new here, I recommend that you instead print my MK2 grip instead: https://www.printables.com/model/388834-einstar-handle-mk2
This is my attempt at making an ergonomic grip for the Einstar, it is inspired by the grip of the Einscan Pro HD that I really quite like, and I am really happy with how it turned out!
I use the fuzzy skin setting to get a good grip texture https://all3dp.com/2/cura-fuzzy-skin-simply-explained/ https://help.prusa3d.com/article/fuzzy-skin_246186
To save some time, I use the “Fuzzy Skin Outside Only” setting in Cura.
You can print this in 4 ways.
1.) You have a dual material printer and want a TPU grip
• Download the dual-material body and grip • Merge them in your slicer and set the grip to print with TPU. • I recommend that you turn on “fuzzy skin” for the grip part to get texture
2.) You have a single material printer, but still want a TPU grip
• Download the dual material body and the two separate_grip halves. • Print the main body which will require supports to be turned on. • Print the two grip halves in TPU. • If you want to use “fuzzy skin” to get a grippy texture, be ready that you might need to sand the inside a bit to make it fit again. • Use contact cement or epoxy to glue the grip halves to each other and the body.
3.) You have a single (or dual) material printer, and want a textured grip
• Download the dual-material body and grip • Merge them in your slicer • Select the grip part and enable “fuzzy skin”
4.) You have a single extrusion printer and don't care about grip texture
• Download the single material version and print it.
For all of the versions, you need to print two up/down buttons and one middle button. These prints laying flat on the build plate with the “rails” towards the build plate.
All the body part prints standing on their “back”.
I recommend printing the body in a rigid material of your choice, and for the grip, the softer the TPU is, the better.
To mount it, you will need one of these tripod screws: https://www.amazon.se/dp/B08SKJRRQC If you don't want to get them, you can a similar one or use any short ¼"-20 screw of your choice (around 10mm in length).
#Einstarhandledesign
Design and description by Cederb , licensed CC-BY-SA.
Frequently asked
How long does shipping take?
Einstar Handle MK1 is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
