G Clamp Cup Washer Shoe
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~10 g
- Express shipping
- $20
More information
Bought aNeewer NW-8000 and the rebandedK-Mart Anko Professional Gaming Microphone.
Due to the low friction of the cup washer against the under-side of a desk, you would need to over-compensate with extra clamping force
This shoe was designed to slip over the cup washer to increase the friction to the clamped surface
Cup washer is 32mm diameter and model has a zero tolerance friction fit
It's best to use a flat-head screw driver to seat the shoe over the cup washer
Those with printers not dialled in may want to scale the model by a few percent larger
Neewer Boom Microphone https://www.amazon.com/dp/B081RLSPWB
Anko Branded K-Mart Australia Boom Microphone https://www.kmart.com.au/product/professional-gaming-microphone/3432806
Great review of the Boom Microphone
Have uploaded 3MF file which is compatible with Prusaslicer amongst others
3MF to STL conversion via Windows 10 3D Builder
Clamp known as
C-Clamp
G-Clamp
G-Cramp
Print Settings
Printer Brand:
Monoprice
Printer: Mini Delta
Rafts:
No
Supports: No
Resolution:
0.2
Infill: 30%
Filament: Unknown TPU Black
Notes
Printed concentric ring-side down
Post-Printing ============= Cup Washer for boom microphone clamp
Print in this orientation. No supports required
Do not print in this orientation
Standard cup washer with crushed foam insert
Original
Note the poor contact surface leading to poor friction of the clamped surface
Post installation
Post installation reverse side
Category: Audio
Design and description by milesi , licensed CC-BY.
Frequently asked
How long does shipping take?
G Clamp Cup Washer Shoe is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
