Hexagonal wooden wallmount shelf (modular, extensible)
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~33 g
- Print time
- ~1.8 h
- Express shipping
- $20
More information
It is not the best use of space but it looks great in my office/tinkering corner. The size of the Rack on the Photo is in total 126cm wide. Each board is 250x200x18mm.
With 250mm boards each Hexagon cell is measures 45cm in height and 50cm corner-corner. You can use longer or shorter boards (see PDF for cutouts).
The whole thing is amazingly sturdy and can bear quite some load, but mounting took almost a morning.
Printing
• PETG (Das Filament) - for stability • >66% infill - for stability • 0.4mm Nozzle • 0.2 Layers “Quality” Setting in Prusa Slicer
Mounting instructions/hints
• It is a good idea to create a jig with 6 (or more) thin boards of the same length as your shelf boards to mark and drill the holes. After all you will have to drill 14 holes and a minor deviation may cause a skewed shelf. • Cut out the shelf boards about 4mm where the joints go otherwise you will have an ugly gap in all corners where smaller stuff falls off the rack. • Mount the joints with 3.5mm screws and Fischer Dübel (Wall plug? Rawlplug?) • Mount the shelf boards with small countersunk wood screws • Mount the front side joints
The shelf is not entirely my own idea (but my own creation). I have seen something similar on TV before. I really liked it and re-modeled it according to my memory.
Design and description by truschival , licensed CC-BY-SA.
Frequently asked
How long does shipping take?
Hexagonal wooden wallmount shelf (modular, extensible) is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
