Lanyard Clip
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~10 g
- Express shipping
- $20
More information
Snap clip for standard 20mm wide lanyard strap and ID badge. Prints clean with no additional supports required. Reliable and secure.
2023-10-19 update | added wider version: Lanyard-Clip-3-cards-wide-2C01-0_MatthewGTaylor.STL. This will hold 3 cards stacked together.
Original file renamed to Lanyard-clip-original_MatthewGTaylor.STL and rotated to default to the best orientation for printing.
Notes | Works well in most materials - I use PETG for high temperature because I leave it in the car.
Orient on its side as shown before slicing using, prints well in this orientation with no additional supports required. There are a couple of small supports designed in to be cut out after printing. For little parts like this I find it can be a good idea to print a couple at a time to allow adequate cooling for each layer.
Post Printing | After printing, cut the X shaped support out between the two cylinders and cut the small triangular fin out of the side of the clearance cut (see picture). Cut or remove any ring that is in the lanyard loop. Slip the lanyard loop through the slot and around the cylindrical posts on both sides. To insert or remove the badge, turn it up so the so it's upside down and slide the badge out through the gap.
Designed in Solidworks.
Design and description by MatthewGTaylor , licensed CC-BY.
Frequently asked
How long does shipping take?
Lanyard Clip is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
