Long Shelf Brackets
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~63 g
- Print time
- ~3.5 h
- Express shipping
- $20
More information
These shelf brackets are designed with strength and rigidity in mind, combining a sleek, parametric look with serious load-bearing capabilities. Perfect for everything from industrial workspaces to stylish home shelving.
Dimensions
Length: 290mm
Height: 150mm
Width: ~50mm (at thickest point)
Designed with generous fillets and internal struts to minimize flex and maximize load transfer.
##
Fully scalable down — maintain structural integrity even when resized for smaller applications.
Reinforced X- and Y-axis bracing for high rigidity under vertical and lateral load.
Optimized for strength — no unnecessary overhangs, easy to print without supports. Other than the middle part. Possible solution would be to print Right and Left bracket twice.
Multiple mounting holes for secure installation on both wall and shelf surfaces.
##
Print Settings (for best strength & rigidity)
Tested on Creality K1 Max (CoreXY, 300x300x300mm)
Material: PETG or ABS/ASA (for durability), PLA+ works for lighter loads
Layer Height: 0.2mm
Walls: 4
Top/Bottom Layers: 5
Infill: 25% - 50% (Gyroid or Cubic recommended) - Depending on your needs
Brim: Optional
For maximum rigidity, orient flat on the bed with the long base side down and use a slow outer wall speed for better layer bonding.
Mounting Tips
Use M4-6 (depending on load) or wood screws with wall plugs for secure mounting. Brackets are created to tolerate moderate-to-heavy shelving loads when printed at full size.
Design and description by Filip Trunda , licensed CC-BY.
Frequently asked
How long does shipping take?
Long Shelf Brackets is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
