Magnetic School Locker Shelf
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~60 g
- Express shipping
- $20
More information
My son needed a small shelf for the inside of his school locker. We designed this magnetic, adjustable shelf to fit his iPhone, and a few other little items. The design uses ten (10) 4mm x 8mm neodymium magnets embedded into the object mid-print.
Print instructions
This model makes use of the ability to embed magnets into the print itself by automatically pausing for a filament change, inserting the magnets, and then resuming the print. This "entombs" the magnet in a snug fitting so that it won't pop out during use.
The included gCode will pause for filament change after layer 29 is complete. This occurred at approximately 1h 35m into the print. This allows you to place the magnets in the housings, and then quickly wipe down the top of the magnets to remove any/all oils. Resuming the print will then have the printer cover the magnets, permanently fixing them into the shelf.
Note: Since the bed of the printer is heated, I let the magnets sit in housings for a minute or two before restarting the print. This allowed the magnets to heat up a little, rather than being cold. I'm not entirely sure this made a difference or not, but it felt right, so I did it. If you run in to a different experience, please let me know.
Otherwise, this was a very simple print. Took some time (9h) to complete.
Designed in Fusion360. Sliced with PrusaSlicer 2.0.
Design and description by CAR , licensed CC-BY-SA.
Frequently asked
How long does shipping take?
Magnetic School Locker Shelf is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
