“No Slip Clip” a Bambu Spool Filament Clip
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~18 g
- Print time
- ~1 h
- Express shipping
- $20
More information
Before making this clip, please check out my new revised clip, the “Bambu Forever Clip” is a much better and permanent solution to securely hold your filament in place and it stays on your spool even in the AMS
https://www.printables.com/model/743114-bambu-forever-clip
I think using a .2mm nozzle would be ideal if you have one, due to the thin walls around the filament hole, but I did have success with a .4mm nozzle
A Version 2 has been added, thinner body and slightly reduced the size of the pins for easier insertion, increasing the distance of the hole to prevent interference with the spool side and a chamfer around the hole to guide in the filament easier. Please use the V2 files, once I verify they are an improvement, I will delete the original files.
I was getting tired of filament clips that clip onto the spool ring and slip on the spool and don't hold the filament snugly causing the filament to sometimes unclip and unwind itself. Also the clips that you have to place under another strand to hold down are tedious, and have actually snapped some filament due to the side pressure it puts on it. So I decided to utilize the two hole pattern around the spools of Bambu and Overture rolls to protrude through and slide the filament through, and it holds it firmly enough to not let the filament slip, and also due to the two hole design, it doesn't slip around the rim of the spool either, thus the “No Slip Clip”
This design should fit 1.75mm filament, but if it is too small, you can run a .078" (or 2mm) drill through the holes to allow a smoother fitment. I only have Bambu and Overture spools currently so that is why these are the only 2 designs I have, as I acquire different brands I will design similar clips if the spools allow. If you have other spools and like this concept of a filament clip feel free to remix this to accommodate your spools.
I used PETG for these, but TPU might work even better as the pins seems to be a little fragile
Design and description by Kevin , licensed CC-BY-SA.
More 3D printed Bambu Lab accessoriesMore 3D printed filament clips
Frequently asked
How long does shipping take?
“No Slip Clip” a Bambu Spool Filament Clip is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
