Pac-Man & Ms.Pac-Man Inspired Coaster Set (No AMS or MMU required)

The Pac-Man & Ms.Pac-Man Custom Coaster Set!

Featuring the iconic Pac-Man maze and the four varying Ms.Pac-Man mazes!

You can always get creative and use different colors to make the alternate colored mazes. ie. Pac-Man Plus, The alternate colored Ms.Pac-Man mazes, or make them with your own colors.

Each one will take a little less than 5 hours to print on average.

NOTES

• The .3mf files should be ready to be used with Prusa Slicer with the pauses already in place. Just make sure detect thin walls/print thin walls is on when printing with dots. • If using Cura or any other slicer, be sure to check around the power pellets/big dots before printing.

Nozzle:

• 0.4mm with 0.16mm layer height works.

Infill:

• 15-20% with Gyroid pattern is preferred especially with the dots.

Pauses With dots models:

• 4.70mm (from the base color, change to the dot color) • 5.75mm (from the dot color, change to background color) • 6.50mm (from background color to maze wall color)

Pause Without dots models:

• Pause at 6.50mm (from background color to maze wall color)

Colors (game accuracy):

• Pac-Man: Black background, Yellow dots, Dark blue maze wall. • Ms.Pac-Man 1: Black background, White dots, Pink maze wall. • Ms.Pac-Man 2: Black background, Yellow dots, Light blue/Cyan maze wall. • Ms.Pac-Man 3: Black background, Red dots, Orange/Brown maze wall. • Ms.Pac-Man 4: Black background, White dots, Dark Blue maze wall.

Have fun and share your makes!

Design and description by lazor226 , licensed CC-BY.