Sliding door lock/Child lock - Dětský zámek na posuvné dveře
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~34 g
- Print time
- ~1.9 h
- Express shipping
- $20
More information
Přemýšlel jsem jak zajistit dveře své pracovny před dětmi, různé petličky apod mi nefungovaly moc dlouho, tak jsem vymyslel tohle. Je to jednoduchý koncept jedné (dvou pro oboustranný efekt) části nainstalované pevně na dveřích a druhé nasazovací (drží pomocí dvou magnetů) pro zajištění dveří v zavřené poloze. Používám když nejsem doma a moji malí kutilové občas rádi navštěvují mé království a nebo abych nebyl rušen na Home office (nasazení zevnitř).
Jediné co je potřeba jsou tři (šest) vrutů a dva magnety 6x20x2 (např SOLLAU neodymový silný magnet hranol 20 × 6 × 2 mm 10 ks - Magnet | Alza.cz).
Pokud budete chtít úpravu napište, nebo si upravte sami :)
I was thinking for quite some time about how to secure the door of my workshop from kids. Various locks didn't work for me for, so I came up with this. It is a simple concept of one (two for double-sided effect) part installed firmly on the door and the other snap-on (held by two magnets) to secure the door in the closed position. I am using it when I'm not at home and my little do-it-yourselfers sometimes like to visit my kingdom or to not be disturbed on home office (locked from the inside).
All you need are three (six) screws and two 6x20x2 magnets (Amazon.com : magnet 20x6x2).
Feel free to adapt it to your own doors :)
Design and description by PabloSm , licensed CC-BY.
More 3D printed child safety locksMore 3D printed sliding door parts
Frequently asked
How long does shipping take?
Sliding door lock/Child lock - Dětský zámek na posuvné dveře is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
