SnapClaw - Multi-purpose clip
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~21 g
- Print time
- ~1.2 h
- Express shipping
- $20
More information
The scalable multi-purpose clip.
Fast to attach and remove and can be done so one handed.
Note
This is a small object with close clearances so a relatively well tuned printer will be needed.
Print instructions
Two perimeters/shells work well but if you find that the claw tips snap off of you let the claws snap shut then increase the perimeter count.
Custom Section
What files to use:
Print a A and B side, if you find the fit to be too tight use the loose versions.
If you plan to scale them up use the Tight version.
The Tight version worked well for 150% and 200% scale, bigger then that and it might be a bit loose but should still function unless you go way too big.
Assembly
Fit the hole over the post with the claws in the fully open position. You will find that the end of the clip with a hole/post has a small point that will catch a little during assembly, this is intended, a little force/wiggle should get it to snap in.
With the claw still fully open wrap the rubber band around the little hooks, try to insure that each loop of the rubber band has about the same tension in it or it will bunch up as the claw is closed.
Design and description by Kezat , licensed CC-BY.
Frequently asked
How long does shipping take?
SnapClaw - Multi-purpose clip is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
