Toy Mace

This is a toy mace. It was designed with a simple modern look, not medieval vintage or sci-fi. The shaft length is selectable. The shortest shaft can be printed even on printers with a 120mm bed size, such as the Voron 0.

Print settings

• Filament: PLA • Nozzle: 0.40mm • Layer height: 0.20mm • wall: 2 • Supports: no • Brim: Yes, for shaft part

Parts to Print: Head, Shaft, Grip end

Assembly

Start by trimming off the built-in brim on the head part.

Screw the shaft into the head part, then screw the grip end part onto the shaft. That’s it! Optionally, you can attach a strap to the end of the grip.

Notes

• There are three different shaft lengths available. Please choose the length you prefer within your printer’s Z-axis printing range. • For printers that can print up to 250mm in height, there is also a model with the head and shaft integrated as one piece. The grip end is the same for all versions. • Applying a subtle fuzzy skin to the Head and Grip End gives it the look of a sand-cast part and makes it feel more realistic. • Even though it's just a toy, please don't go around hitting people with it!

Design and description by BaGooN , licensed CC-BY-SA.