Universal Magnetic Cable Holder / Cable Organizer (Parametric)

Try my other cable holder design!

Features

• Has a bunch of channels to hold round cables of different sizes • Does not work with flat cables • Uses 15x3 magnets, so your cable will not fall off • You can edit the file to use whatever size magnets you have (but in my experience smaller ones don't have enough strength to hold cables)

Printing instructions

• You have to print this in TPU, otherwise it will be really difficult to get the cables into the holder. You can try your luck with PETG, as it is also a bit flexible, but I can't promiss that it will work. PLA definitely will not work though. • Print with the magnet hole facing up. • If you are having bed adhesion issues on Prusa's textured (powder-coated) sheet, print on the smooth PEI sheet, it will stick REALLY well. Afterwards you can just spray some isopropyl alcohol on the part and it will come off easily. • Use a drop of superglue to attach the 15x3 magnets.

Note: the links to Aliexpress are affiliate, I get a small commission if you buy anything from them.

Design and description by neoyarus , licensed CC-BY-SA.