Bambu AMS RepRack Mount
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~34 g
- Print time
- ~1.9 h
- Express shipping
- $20
More information
After burning through multiple spools of filament with test prints, and a dozen modifications, I feel confident this is a great solution for a RepRack AMS mounting system. I will be posting detailed instructions if needed.
CHECK REMIXES for other versions!
IMPORTANT NOTE: This version fits the 3 SIDE SLOT Version AMS. There are 2 other versions. 5 Slot version or a new universal version in the works.
This is a Project! I made it as plug-N-play as possible, but does require drawer slides.
• Does NOT screw into AMS, AMS slides onto the Right/Left Mount. • Used 10inch Drawer Slides found on Amazon: https://a.co/d/6Vsg7Ce • RepRack Rod Bracket (Slides onto your conduit Rods) is the same for left and right. • AMS Mount has a right and left side. • I had to move a RepRack hanger to allow for space and to be centered below my top reprack row. You might not have to do this.
Print settings
• Modified 100% Infil: I used slicer modifiers to set infill to 100% on the top of the Rod Brackets and the outside mounting point point for AMS Mounting brackets (Bambu Studio .3mf files attached). Mark brackets where your drawer slides will mount, and pre-drill for screws that came with drawer slides. It's solid! • I used Polymaker PLA PRO Dark Grey (a.k.a. DarK2 Grey - K2 Dark Grey) • 0.28 Layer Height
NOTE: As long as your AMS can fit on one of your RepRacks between rows, mine are 91/4 inches between rows (Rod bottom to the below racks Rod Top)
Design and description by K2_Kevin , licensed CC-BY-SA.
Frequently asked
How long does shipping take?
Bambu AMS RepRack Mount is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
