EDC Shelf for IKEA Mulig

Shelf for your EDC with sturdy hook for a backpack.

I use it for my phone and wallet. I hang my backpack on the hook, even when its packed. Its not only neat, but it is actually easier to pack and unpack it, while hanging.

If you don't need the shelf, but like the hook I got you covered- JustHook.stl is what you need.

There are two parts: shelf and hook. It uses the screw that is already in Mulig hanger. Putting the shelf on the hook, there should be tight-fit, but if needed, just use a dab of superglue.

The pattern on the shelf's surface is actually gyroid infill. You can customize it in your slicer- just add box modifier, set the top layer to none and adjust the infill pattern and density to your liking. Or if you use PrusaSlicer, just open my .3mf and change values.

Print time

- shelf 4,5 hour (gyroid pattern, 50% for intricate pattern)

- hook 4 hours (30%, 3 perimeters)

- just the hook 2 hours (30%, 3 perimeters)

If you would like to further modify this shelf feel free to do so- get the STEP files or F360 archive and go crazy! Maybe add phone dock, wireless charger or just change the dimensions of the shelf.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2

Filament:

- PLA

Category: Organization

Design and description by Drukarex.pl , licensed CC-BY.