Grid-based organizers/dividers for STANLEY Multi-Purpose Storage Bin

The storage bin with drawers doesn't include dividers for the drawers, so if you want to have more than 1 item per drawer, you either need to buy dividers or find them from printables. Or you can try out other design of small organizers. There were nice designs but none of them were perfect for my usage so I decided to do my own.

My design goals:

• Copy the good idea of grid-based system • Modular, there should be only one version per unit and it should be possible to but in different places in the grid system (v0.1 doesn't comply with this). When you get more parts, you should be able to re-organize easier. It's not easy if you need certain sized bins to fill certain spots in the drawer • If one ore more printed units are taken out of the drawer, others should keep their position • With narrow ([2-6]x1) bins it should be easy to get small parts, so there is fillet in the front bottom corner to help in this

This lead to 6x2 system for small draer, where there are 6 rows (from front) and 2 columns. I don't have yet large drawers, but as soon as I get one, I'll create the base for it too.

Changelog

• 2024-04-20: Three new models: unit_3x2_v1_three_slots, unit_3x2_v1_six_slots and unit_3x2_v1_nine_slots • 2024-04-18: Initial release

V0.1

This works only for small drawers and for 3 bins. Wanted to share it too as it you only need simple organization, this works totally fine.

V1.0

If you are more after more dynamic organization, V1 handles that much better. each unit can be put “anywere” in the grid.

Design and description by Hasanen , licensed CC-BY.