Hidden wall mount tapered dovetail
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~24 g
- Print time
- ~1.3 h
- Express shipping
- $20
More information
This part was designed to replace a picture hanger and nail that my key hook hangs on. The hanger always pivoted when the weight wasn't balanced and was easy to knock off the nail. This design will fit snugly, fixing that issue.
The dovetail is tapered so that printer calibration is not critical it should still fit together either sitting a bit higher or lower depending on the size variation.
I designed the dovetail such that it can be printed laying flat or upright. Theoretically the strength should be superior if printed vertically. For best results if printing vertically, the female dovetail should have the small side of the taper on the print bed, and the male part the opposite. This way the raised edge that forms from the first layer won't cause interference.
I printed this part in PETG, though the detail would have been better in PLA and I'm sure PLA would be quite functional for indoor use.
Print instructions
Unassociated tags: frame hanger, hidden mount, picture hanger, wall hanger, wall mounted
Category: Household Summary
This part was designed to replace a picture hanger and nail that my key hook hangs on. The hanger always pivoted when the weight wasn't balanced and was easy to knock off the nail. This design will fit snugly, fixing that issue.
The dovetail is tapered so that printer calibration is not critical it should still fit together either sitting a bit higher or lower depending on the size variation.
I designed the dovetail such that it can be printed laying flat or upright. Theoretically the strength should be superior if printed vertically. For best results if printing vertically, the female dovetail should have the small side of the taper on the print bed, and the male part the opposite. This way the raised edge that forms from the first layer won't cause interference.
I printed this part in PETG, though the detail would have been better in PLA and I'm sure PLA would be quite functional for indoor use.
Design and description by agmcmll , licensed CC-BY.
Frequently asked
How long does shipping take?
Hidden wall mount tapered dovetail is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
