INGCO 20V Tool - Workshop Holders / Brackets
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~49 g
- Print time
- ~2.7 h
- Express shipping
- $20
More information
Updated model here: https://www.printables.com/model/308083-ingco-20v-tool-workshop-holders-brackets-v2
INGCO 20V (P20S) power tool bracket / mount, for holding/hanging your tools in your workshop space.
Can be mounted upside down (hanging) and slide the tools on to the holders.
4 countersunk screw locations for screwing the mount to (or under) your shelf / bench.
Holders use the battery location, so the tools are mounted with the batteries removed.
Tested with Drill, Impact Driver, Impact Wrench, Jig Saw, and Torch, so should work with most if not all available INGCO 20V P20S tools.
For the prototype prints shown I have just printed this with Sunlu PLA+, and Bambu Basic PLA, on my Bambu Labs X1C printer, printed on Textured PEI bed. Supports are required just for the overhang where the tool slides in, very easy to remove and came off clean in my case. 15-25% infill should be totally fine, these were printed with 20%, 4 walls, 4 top/bottom layers - for a bit more strength.
Design and description by WanaGo , licensed CC-BY.
Frequently asked
How long does shipping take?
INGCO 20V Tool - Workshop Holders / Brackets is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
