Lilygo T-Beam SUPREME TS2 Case by Alley Cat

This is an updated version of my TS1 case. The biggest change is the ends come down from the front the same way as the TB1 and the upcoming RAK case for consistent styling and function. This one doesn't require you to remove the SMA nut to install, just move the GPS antenna the end, same as on the TS1 and then you can drop it in SMA first and then the USB side swings down in and clips in place. Hopefully I will be able to make a video soon. Also there is not a built in mount thread anymore, but there is a clip that has a lot of thread mount angles in one. You can use nuts or heat set inserts, and there are three antenna hole options for different antenna diameters. Make sure you look closely at all the options and accessories. I will try to include more info soon.

Heat Set Inserts

T-Beam Supreme Affiliate Link: Buy a T-Beam Supreme

There are 4 options for button configuration, reset button is always low:

A - Middle button is higher

B - Side button is higher

C - Both buttons are higher

D- No buttons are higher

Commercial Use and Attribution Notice:

Alley Chat TS2 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0.

Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the following conditions: Prior to any commercial exploitation, you must contact Alley Cat or MajesticAV, LLC to ensure proper attribution. This requirement extends to any sharing, distribution, or creation of derivative works, including manually crafted designs that emulate this design. Proper attribution must be clearly stated in all instances of use. For official contact methods and further information, visit Majestic AV, LLC - Alley Cat. Any other sources are unauthorized and should not be used for commercial or licensing inquiries.

Suggested Print Settings

Material: PLA+ or PETG Nozzle: 0.4mm Extrusion Width 0.4mm Layer Height: 0.2mm Perimeters: 3 Infill: 20% Top/Bottom Layers: 5 Support Material: None

3D Printing Disclaimer

Thank you for downloading my CAD design! I want to assure you that extensive testing and iteration went into creating this design. However, please keep in mind that 3D printing involves a wide range of variables, including different types of filament, printer settings, and calibration levels. These factors can significantly impact the final print.

Before concluding that the design is flawed, I encourage you to:

• Check your printer calibration: Ensure your printer is properly calibrated. Especially filament shrinkage.

• Adjust print settings: Try changing the print settings to achieve better results.

• Resize the model: Scaling the model up or down slightly may resolve fit issues.

Remember, these are development boards and sometimes have very fragile parts. If you encounter any issues or need assistance, please feel free to reach out to me. I am here to help and can provide guidance to achieve the best results. Claiming a design is bad without considering these variables does a disservice to the community and may discourage others from trying a design that could work perfectly with minor adjustments.

Thank you for your understanding and cooperation. Happy printing!

Design and description by Alley Cat , licensed CC-BY-SA.