Multimeter Mount
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~44 g
- Print time
- ~2.4 h
- Express shipping
- $20
More information
This multimeter mount was designed specifically for an AstroAI DM6000AR. However if might work for other multimeters as i have not tried.
https://www.amazon.com/AstroAI-Multimeter-Resistance-Transistors-Temperature/dp/B071JL6LLL/ref=sr_1_4_sspa?crid=1P3VBKYSYG4IO&dchild=1&keywords=multimeter&qid=1627305046&sprefix=multimet%2Caps%2C200&sr=8-4-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVEEwSTBQVzk3WTRYJmVuY3J5cHRlZElkPUEwMDg5NjM4MTJRRUtMOEVIRkJCVCZlbmNyeXB0ZWRBZElkPUEwNjI3NTMwMTdNVEdIR01MU0FBUiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
My goal was to make a multimeter holder that was both small (in regard to height and the area of the multimeter its holding) and one that could still allow me to use it when on the wall.
I have attached two versions, one is just for the multimeter and the other is for both the multimeters and its leads.
Print Settings: No supports needed. No Brim needed (unless you really want to). I did 10 percent infill with 3 perimeter walls (feel free to do more for a stronger print)
There is a normal version an a “Hesed” version. The Hesed version has the word Hesed on it. For more information on what Hesed means, please go to my page and read the bio.
Consider printing the Hole Tester Piece first to ensure that the screws you have will work. I used some small flat head screws. The tester piece has the same dimensions as the actual print, so if you can fit it you can also fit the actual holder.
I hope it is useful to you!
Design and description by Hesed , licensed CC-BY.
Frequently asked
How long does shipping take?
Multimeter Mount is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
