Snappy Dodecahedron Box

This dodecahedron-shaped box with a snap on lid.

https://youtu.be/ia2_srxa-og

Printing

• Requires good tuning for a nice fit. • No supports needed. • Experiment with adding a slight fuzzy skin for a pleasant surface finish. • You may get a faster lid print by increasing perimeter walls from 2 to 3 or 4.

Style Options

• Plain - Just the basics. Good for adding your own designs • Numbers - Matches a 12-sided die. Not perfectly balanced, though.

Clearance options

• Loose - Easier to take off the lid… whether you want to or not. • Tight - Lid requires a little effort to remove. • More Tight - More secure. Lid requires a little prying to remove. • Impossibly Tight - Do you have a hammer?

How to Close

Set lid on base and push all 5 lid corners down until they snap into place.

How to Open

Method 1

Hold base in one hand with thumb resting on the gap between the base and the lid. Using other hand, pull the lid open in a sweeping motion, like opening a clam shell.

Method 2

Squeeze the base so the latches disengage from the lid.

Method 3

For the “Impossibly Tight” version of this box, use tools to pry the lid off.

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

Click here for attribution examples

Design and description by 3D Printy , licensed CC-BY.