Voron V0.2 Rear Cover Hinge Mod
- Arrives in 2 to 7 business days Printed in Auckland. $10 shipping, free over $75
- 14-day faulty refund If it arrives broken or misprinted, we reprint or refund it
- Secure checkout Card payments handled by Stripe
- Material
- High-Detail Resin (8K)
- Colour
- Grey
- Weight
- ~23 g
- Print time
- ~1.3 h
- Express shipping
- $20
More information
This mod replaces the rear panel clips and some of the side panel clips with new wrap around clips which incorporate hinges. The spool holder is also integrated with the side panel clips to clear the back panel so it can swing open. The main advantage to doing it this way is you don't have to pull your frame apart to add more nuts. Finally to secure the door I have included a simple magnet retainer similar to the front door setup. In addition to printed parts you'll need:
• 4x 6mm magnets (same as the front door ones) • 2x M3x40 screws for the hinges • Some VHB tape to secure hinges and retainer to the rear acrylic panel
Check the print orientation as I haven't rotated the part bodies already, it should be fairly obvious which way to print everything though.
Design and description by mahatmaJman , licensed CC0.
Frequently asked
How long does shipping take?
Voron V0.2 Rear Cover Hinge Mod is printed to order. Lead time is typically 1-3 business days plus 1-4 days NZ shipping. Standard NZ shipping is $10, free over $75.
What material is this printed in?
By default this is printed in High-Detail Resin (8K) at 0.025 mm layer height on an MSLA resin printer. Custom material and colour swaps are available, just leave a note at checkout.
Can I get this in a different colour?
Yes. Every product can be printed in any of the resin colours we stock, or hand-painted on request. Leave a note at checkout or email [email protected].
Do you ship outside of New Zealand?
Currently New Zealand only. Australian shipping is coming.
Who designed this?
Designed by an independent sculptor and licensed for commercial printing. The original is linked on this page.
